LCC-R Slurry Pumps are heavy-duty slurry pumps for abrasive or abrasive-corrosive service. These pumps are available in split-case, elastomer-lined construction.

LCC Rubber-Lined Series (LCC-R)
The LCC Rubber-Lined Series features a split-casing design with molded, replaceable rubber liners. The molded liner may be specified in a variety of natural and synthetic rubbers. Natural gum rubber is standard. The liners offer a shore-A hardness of 30-40 with a tensile strength minimum of 2,700 psi (18 n/mm2).

The liners are vulcanized to metal backing plates and captured at the split casing, suction discharge flanges and stuffing box area to maintain hydraulic and hydrostatic integrity.

LCC-R slurry pumps feature:
  • Double-wall construction with an outer ductile-iron casing and inner molded-rubber liners.
  • Three-vane impellers cast of hard metal or polyurethane.
LCC-R slurry pumps are suitable for moderate discharge head, fine particles and highly corrosive slurries.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Pump

Pump Shaft Diameter

Motor Hp

Motor Rpm

Flow

Motor Mount Type

LCC-RH 50-230-2 N/A 50-230 (2x3-9) N/A 50 mm N/A 15 hp N/A 1800 rpm N/A 200 gpm N/A Hinged offset
LCC-RH 80-300-2 N/A 80-300 (3x4-12) N/A 50 mm N/A 30 hp N/A 1800 rpm N/A 500 gpm N/A Hinged offset
LCC-RH 100-400-2 N/A 100-400 (4x6-16) N/A 50 mm N/A 50 hp N/A 1800 rpm N/A 900 gpm N/A Hinged offset
LCC-RH 150-500-3 N/A 150-500 (6x8-20) N/A 70 mm N/A 100 hp N/A 1800 rpm N/A 1800 gpm N/A Hinged offset
LCC-RH 200-610-4 N/A 200-610 (8x10-24) N/A 100 mm N/A 150 hp N/A 1800 rpm N/A 3000 gpm N/A Hinged offset
LCC-RH 250-660-4 N/A 250-660 (10x12-26) N/A 100 mm N/A 250 hp N/A 1200 rpm N/A 5000 gpm N/A Hinged offset
LCC-RH 300-710-4 N/A 300-710 (12x14-28) N/A 100 mm N/A 250 hp N/A 1200 rpm N/A 8000 gpm N/A Hinged offset
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1