The LCC-M Series Slurry Pump is a hard metal, horizontal, end-suction, centrifugal slurry pump. These pumps are available in single-wall, hard-iron construction.

The hydraulic wet end consists of three components: a shell or casing, an impeller that screws onto the shaft and a suction plate/liner to permit easy assembly and disassembly for maintenance and inspections.

The LCC-M slurry pump does not require a separate outer housing.

Features:
  • A horizontal shaft.
  • A single-wall shell.
  • A three-vane impeller and a suction plate/liner of high-chrome white iron for long, predictable wear life.
The pumps are suitable for high-discharge head, mildly corrosive slurries and a wide range of particle sizes. Custom materials are available for highly corrosive slurries.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Pump

Pump Shaft Diameter

Motor Hp

Motor Rpm

Flow

Motor Mount Type

LCC-MH 50-230-2 N/A 50-230 (2x3-9) N/A 50 mm N/A 25 hp N/A 1800 rpm N/A 200 gpm N/A Hinged offset
LCC-MH 80-300-2 N/A 80-300 (3x4-12) N/A 50 mm N/A 40 hp N/A 1800 rpm N/A 500 gpm N/A Hinged offset
LCC-MH 100-400-2 N/A 100-400 (4x6-16) N/A 50 mm N/A 75 hp N/A 1800 rpm N/A 900 gpm N/A Hinged offset
LCC-MH 100-400-3 N/A 100-400 (4x6-16) N/A 70 mm N/A 100 hp N/A 1800 rpm N/A 900 gpm N/A Hinged offset
LCC-MH 150-500-3 N/A 150-500 (6x8-20) N/A 70 mm N/A 125 hp N/A 1800 rpm N/A 1800 gpm N/A Hinged offset
LCC-MH 200-610-4 N/A 200-610 (8x10-24) N/A 100 mm N/A 200 hp N/A 1200 rpm N/A 3000 gpm N/A Hinged offset
LCC-MH 250-660-4 N/A 250-660 (10x12-26) N/A 100 mm N/A 250 hp N/A 1200 rpm N/A 5000 gpm N/A Hinged offset
LCC-MH 300-710-4 N/A 300-710 (12x14-28) N/A 100 mm N/A 250 hp N/A 1200 rpm N/A 8000 gpm N/A Hinged offset
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1